Looking for a great glue to put your DF Boat kit together?
Maxi Cure is a great slow cure adhesive option that will allow you 10- 20 seconds to line up critical pieces that need to be glued!
Maxi-Cure™ extra thick CA is the best CA for most plastics.
MAXI-CURE™ is the best choice for plastic model assembly. When used with INSTA-SET™, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic. MAXI-CURE™ bonds fiberglass, plastic, hardwood, metal and rubber better than any other hobby adhesive.
DF BOAT USES: This the best glue to use for assembling your DF Boat kit.
Works Best On:
- Soft Wood
- Hard Wood
- Glass & Metal
- Hard Plastics
Unscrew top from nozzle. For finer applications, use the extender tip. Apply Maxi-Cure™ CA to one side of the parts being joined, then hold them tightly to- gether for 10-20 seconds. For larger bonding areas, apply serpentine beads of the CA with enough spacing to allow for the spreading of the adhesive. Insta-Set™ accelerator can be sprayed to cure the CA that oozes from joints. Full strength is reached in three hours. Wipe the nozzle clean before replacing screw-on top. Refrigerate to extend shelf life. Cured CA is stable from -40 to 220° F. Soak extender tip in acetone for cleaning.