IC-Gel™ CA PasteSold Out
Looking for a great glue to put your DF Boat kit together?
IC-GEL™ is a cyanoacrylate paste that is extremely thick which comes in an applicator tube like toothpaste. It has the same bonding and curing time characteristics as MAXI-CURE™. IC-GEL™, however, can be applied to a vertical surface and will stay in place. It will not run. This can be very convenient for some assembly applications. Applying CA to the bottom of a horizontal surface, such as a ceiling, can be very difficult with anything other than a full standard CA bottle. IC-GEL™ can be applied at any angle with just a squeeze of the tube. The gel does, however, have a tendency to continue to come out of the tube for about a second after pressure is released, so this must be taken into account to apply the exact amount of IC-GEL™ that you want.
IC-GEL™ is an excellent putty for plastic models. It will fill any void and can be formed to many shapes. Applying INSTA-SET™ allows IC-GEL™ to be sanded or filed to final shape in less than 20 seconds.
IC-Gel has a superior shelf life of over three years and its application nozzle makes it the easiest of all CAs to apply.
DF Boat Uses
Excellent for assembling kits and rig parts needing assembly
Works Best On:
- Balsa Wood
- Soft Wood
- Hard Wood
- Glass & Metal
- Hard Plastics
Screw on top and cap unit to puncture seal on the tube. Remove cap and apply IC-GEL to one surface, and then hold parts tightly together. Sets in 10-25 seconds. Replace cap immediately after use. Store in cool dry place.